Birch wood spirit

First in class at the Sussex Woodcraft Society www.sussexwoodcraft.co.uk 2012 Annual show.

Wood: Silver birch (Betula pendula)

Height: 25 cms

Finish: Linseed oil and Rennaissance  wax

This was carved in wet Silver Birch, the tree having been cut 2 months before work commenced. Drying checks (cracks) were avoided by flattening and grooving the back of the log with a chainsaw to equalize the shrinkage stress between front and back (heartwood and sap wood).
Carving emphasis was placed on framing the image by a surround of deep cuts to create shadows, all done with a scarey sharp knife.
Rennaissance wax was developed for the British Museum to preserve all it's antiquities. It dries hard and is resistant to finger marking.

Apple wood spirit

This is a wood spirit carved in Apple that was copied from an article by Keith Howard in Woodcarving Illustrated Summer 2011. I was interested in how the author had achieved such a good depth of field which in time I think I managed to achieve after many hours of work.

Wood:  Apple (Malus spp)                            

Height: 34 cms

Finish:  Linseed oil and Rennaissance wax

The wood was carved within 3 months of the tree being felled, and in order to minimize drying checks (cracks) the back of the carving was flattened with a chain saw and deeply grooved into the heartwood throughout the length. Two years on the wood is dry with no cracks.

Depth of field is enhanced by deep "framing" cuts done with a very sharp knife and lots of work.

Body language!

I sketched out this caricature from a cartoon I found on the Fantasia website, a Walt Disney film made in the 1940's. I was attracted by the action of the piece which posed a few carving challenges.

Hippy-shake

Hippy-shake

Hippy-shake

Wood: Lime (Tilia x europea)    Total height: 12 cms      Finish: Linseed oil and beeswax polish

Hippy-shake is carved from one piece of wood, the complex symmetry necessitated several scaled sketches. Most of the carving was completed with a knife, except in concave depressions where small gouges were used. The knife was particularly effective in carving the deep folds of the tutu.

Doom and gloom

The source of this pattern is obscure like the previous post. I was attracted by the body language, something that hitherto I have paid little attention to.

Doom and Gloom

Doom and Gloom

Wood: Lime (Tilia x europea)

Height: 16.5 cms

Finish: Linseed oil and beeswax polish

The body language spells a miserable mood!
I went to town with stylized folds for the oversize trousers, which caught the effect I was after. Most (90%) of the carving was completed with a knife. I resort to gouges where concave cuts are required.

A Scandinavian in America

The source of this pattern is obscure. Suffice to say that he is one of the old country sons and can be seen in Scandinavian festivals throughout the Midwest of the US.

Lofty

In this instance I have broken some rules and mixed flat plane carving with some of my own style.
                                                          
Wood: Lime (Tilia x europea)

Height: 18.5 cms

Lofty

Finish: Linseed oil and beeswax

I used this occasion to practice a few stylized folds which worked out quite well.

Characters from the USA

Ozzy

 These 2 characters I took from the publication Caricature Carving-The Best of Woodcarving Illustrated, a magazine from the USA.

Wood:  Lime (Tilia x europea)

Height: 10 cms

Finish: Linseed oil and beeswax polish.

Ozzy is an Ozark mountain man, whilst Olgit can be found anywhere in central USA.

Olgit

Both figures were carved quite rapidly with a knife, following very clear illustrations.

Finishing procedure
Creating shadow with deep cuts seems to work well. I never use abrasives to clean up, it destroys detail and ruins the surface burnish achieved by a sharp blade! The procedure I follow for finishing is:
1. Scrub the carving with warm soapy water to remove hand grease.
2. Wipe off water with a paper tissue, then before drying occurs liberally coat the wood with a mixture of 75% boiled linseed oil and 25% turpentine, dabbing off any excess. This prevents the grain from swelling and raising, and it smells nice! Allow to dry over say 14 days.
3. Brush on wax of choice. I initially used beeswax but now I use Rennaissance wax to resist finger marking. Allow to dry for a few days, then burnish with a soft brush to reach into the deeper cuts.
4. Enjoy!

Troll queen

Troll queen is my first serious attempt in creating depth and shadow without the use of colour (paint). I used an article by Harley Refsal in Woodcarving Illustrated Spring 2011 for the basic pattern and to learn the rules of Scandinavian flat plane carving. Harley is  a member of the Caricature Carvers of America http://www.cca-carvers.org/

Wood: Lime (Tilia x europea)

Height: 13 cms

Finish: Linseed oil and beeswax


My goal was to achieve simplicity, and hopefully some speed since all previous work had been relatively slow going with me getting too involved with detail. The flat plane carving was done with an American style carving knife tailored to fit my hand (see later post). A cross section of an arm, the body or head should resemble an octagon, with shadows created by deeper cuts.